类型 5282 - 伺服辅助式二位二通隔膜阀 burkert

类型描述

5282 为伺服式隔膜电磁阀。要确保阀门功能正常，则需要一个最小压差。根据不同的应用而定，可以选择各种膜片材质和工作方式。标准供货的黄铜阀体符合所有欧洲饮用水标准的要求。阀体还有不锈钢和灰铸铁材质的版本。其二位三通先导阀的常开和常闭功能可方便地进行转换：只需将其在主阀座上进行旋转即可。电磁线圈采用可高度耐化学腐蚀的环氧树脂封装。5282 型配备了手动开关，可用于调试和测试。与 DIN EN 175301-803 A 型插头配套，不锈钢外壳符合 NEMA 4X 的要求。

1）伺服辅助式隔膜阀，最大额定宽度 DN65

2）隔离膜片，适用于腐蚀性介质和污染的介质

3）打开和关闭时间可分别设置

4）防爆保护型式（类别 2）

5）手动开关使用方便

 

Type 5282 - Servo-assisted 2/2-way diaphragm valve

Type description

The 5282 is a servo diaphragm solenoid valve. To ensure that the valve is functioning properly, a minimum differential pressure is required. Depending on the application, you can choose from a variety of diaphragm materials and working methods. The standard supplied brass body complies with all European drinking water standards. The valve body is also available in stainless steel and grey cast iron. The normally open and normally closed functions of the two-position three-way pilot valve can be easily converted: simply rotate it on the main seat. The solenoid is encapsulated in a highly chemically resistant epoxy. The Model 5282 is equipped with a manual switch for commissioning and testing. Compatible with DIN EN 175301-803 Type A plugs and stainless steel housings to NEMA 4X.

1) Servo-assisted diaphragm valve, maximum rated width DN65

2) Isolation diaphragm for corrosive media and contaminated media

3) The opening and closing times can be set separately

4) Explosion protection type (category 2)

5) Easy to use manual switch